Part Number Hot Search : 
MT30210 C331M SI1903DL F1001 474M000 ZTX51 SC4626 CXA2566M
Product Description
Full Text Search
 

To Download IRLRU2905 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PD- 91334E
IRLR/U2905
HEXFET(R) Power MOSFET
l l l l l l l
Logic-Level Gate Drive Ultra Low On-Resistance Surface Mount (IRLR2905) Straight Lead (IRLU2905) Advanced Process Technology Fast Switching Fully Avalanche Rated
D
VDSS = 55V
G S
RDS(on) = 0.027 ID = 42A
Description
Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve the lowest possible on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient device for use in a wide variety of applications. The D-PAK is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU series) is for through-hole mounting applications. Power dissipation levels up to 1.5 watts are possible in typical surface mount applications.
D -P ak T O -252 A A I-P ak T O -25 1A A
Absolute Maximum Ratings
Parameter
ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS EAS IAR EAR dv/dt TJ TSTG Continuous Drain Current, V GS @ 10V Continuous Drain Current, V GS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds
Max.
42 30 160 110 0.71 16 210 25 11 5.0 -55 to + 175 300 (1.6mm from case )
Units
A W W/C V mJ A mJ V/ns C
Thermal Resistance
Parameter
RJC RJA RJA Junction-to-Case Case-to-Ambient (PCB mount)** Junction-to-Ambient
Typ.
--- --- ---
Max.
1.4 50 110
Units
C/W
** When mounted on 1" square PCB (FR-4 or G-10 Material ) . For recommended footprint and soldering techniques refer to application note #AN-994
www.irf.com
1
12/8/00
IRLR/U2905
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
V(BR)DSS
V(BR)DSS/TJ
Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance
RDS(on) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD LS Ciss Coss Crss
Min. Typ. Max. Units Conditions 55 --- --- V V GS = 0V, ID = 250A --- 0.070 --- V/C Reference to 25C, ID = 1mA --- --- 0.027 VGS = 10V, ID = 25A --- --- 0.030 W VGS = 5.0V, ID = 25A --- --- 0.040 VGS = 4.0V, ID = 21A 1.0 --- 2.0 V VDS = VGS, ID = 250A 21 --- --- S VDS = 25V, ID = 25A --- --- 25 VDS = 55V, VGS = 0V A --- --- 250 VDS = 44V, VGS = 0V, TJ = 150C --- --- 100 VGS = 16V nA --- --- -100 VGS = -16V --- --- 48 ID = 25A --- --- 8.6 nC VDS = 44V --- --- 25 VGS = 5.0V, See Fig. 6 and 13 --- 11 --- VDD = 28V --- 84 --- ID = 25A ns --- 26 --- RG = 3.4, VGS = 5.0V --- 15 --- R D = 1.1, See Fig. 10 Between lead, --- 4.5 --- nH 6mm (0.25in.) G from package --- 7.5 --- and center of die contact --- 1700 --- VGS = 0V --- 400 --- pF V DS = 25V --- 150 --- = 1.0MHz, See Fig. 5
D
S
Source-Drain Ratings and Characteristics
IS
ISM
VSD trr Qrr ton Notes:
Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time
Min. Typ. Max. Units
Conditions D MOSFET symbol --- --- 42 showing the A G integral reverse --- --- 160 S p-n junction diode. --- --- 1.3 V TJ = 25C, IS = 25A, V GS = 0V --- 80 120 ns TJ = 25C, IF = 25A --- 210 320 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 ) VDD = 25V, starting TJ = 25C, L =470H RG = 25, I AS = 25A. (See Figure 12) ISD 25A, di/dt 270A/s, VDD V(BR)DSS, TJ 175C Pulse width 300s; duty cycle 2%.
Caculated continuous current based on maximum allowable This is applied for I-PAK, LS of D-PAK is measured between
lead and center of die contact. junction temperature; Package limitation current = 20A.
Uses IRLZ44N data and test conditions.
2
www.irf.com
IRLR/U2905
1000
TOP VGS 15V 12V 10V 8.0V 6.0V 4.0V 3.0V BOTTOM 2.5V
1000
ID , Drain-to-Source Current (A )
100
ID , Drain-to-Source Current (A )
VGS 15V 12V 10V 8.0V 6.0V 4.0V 3.0V BOTTOM 2.5V TOP
100
10
10
2.5 V
2.5V 2 0 s P U LS E W ID TH T J = 2 5C
0.1 1 10
1
100
A
1 0.1 1
2 0 s P U LS E W ID TH T J = 1 75 C
10
100
A
V D S , D rain-to-S ource V oltage (V )
V D S , D rain-to-S ource V oltage (V )
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
1000
3.0
R D S (on) , Drain-to-S ource O n Resistance (N orm alized)
I D = 4 1A
I D , D ra in -to-S ourc e C urrent (A)
2.5
T J = 2 5 C
100
2.0
T J = 1 75 C
1.5
10
1.0
0.5
1 2.0 3.0 4.0 5.0
V D S = 2 5V 2 0 s P U L S E W ID TH
6.0 7.0 8.0 9.0
A
0.0 -60 -40 -20 0 20 40 60 80
V G S = 10 V
100 120 140 160 180
A
V G S , G ate-to -Sou rce Voltage (V)
T J , Junction T em perature (C )
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
www.irf.com
3
IRLR/U2905
2800
2400
C iss
2000
V G S , G a te-to-S ou rc e V o ltag e (V )
V GS C is s C rs s C oss
= = = =
0V, f = 1MHz C g s + C g d , C d s S H O R TE D C gd C ds + C gd
15
I D = 2 5A V DS = 44V V DS = 28V
12
C , Capacitance (pF)
1600
9
1200
C oss
6
800
C rss
400
3
0 1 10 100
A
0 0 10 20 30
FO R TE S T CIR C U IT S E E FIG U R E 1 3
40 50 60 70
A
V D S , D rain-to-S ourc e V oltage (V )
Q G , T otal G ate C harge (nC )
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
1000
1000
I S D , R everse Drain C urrent (A )
O P E R A TIO N IN TH IS A R E A L IM ITE D B Y R D S (o n)
I D , Drain C urrent (A )
100
10 s
100
100 s
T J = 1 75 C T J = 25 C
10 1m s
10 0.4 0.8 1.2 1.6
V G S = 0V
2.0
A
1 1
T C = 25 C T J = 17 5C S ing le P u lse
10
10m s
2.4
100
A
V S D , S ourc e-to-D rain V oltage (V )
V D S , D rain-to-S ource V oltage (V )
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
4
www.irf.com
IRLR/U2905
50
VDS
LIMITED BY PACKAGE
RD
VGS
40
D.U.T.
+
RG
I D , Drain Current (A)
-VDD
30
5V
Pulse Width 1 s Duty Factor 0.1 %
20
Fig 10a. Switching Time Test Circuit
10
VDS 90%
0 25 50 75 100 125 150 175
TC , Case Temperature ( C)
10% VGS
Fig 9. Maximum Drain Current Vs. Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
10
Thermal Response (Z thJC )
1
D = 0.50 0.20 0.10 PDM t1 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC t2
0.1
0.05 0.02 0.01
0.01 0.00001
0.0001
0.001
0.01
0.1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
IRLR/U2905
500
E A S , S ingle Pulse Avalanc he E nergy (m J)
TO P
400
1 5V
B OTTOM
ID 1 0A 17 A 25A
VDS
L
D R IV E R
300
RG
20V tp
D .U .T
IA S
+ V - DD
A
200
0 .0 1
100
Fig 12a. Unclamped Inductive Test Circuit
0
V D D = 25 V
25 50 75 100 125 150
A
175
V (B R )D SS tp
S tarting T J , J unc tion T em perature (C )
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
IAS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
10 V
QGS VG QGD
VGS
3mA
D.U.T.
+ V - DS
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
6
www.irf.com
IRLR/U2905
Peak Diode Recovery dv/dt Test Circuit
D.U.T
+
+
Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer
-
+
RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test
+ VDD
Driver Gate Drive P.W. Period D=
P.W. Period VGS=10V
*
D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt
VDD
Re-Applied Voltage Inductor Curent
Body Diode
Forward Drop
Ripple 5%
ISD
* VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFETS
www.irf.com
7
IRLR/U2905
Package Outline
TO-252AA Outline Dimensions are shown in millimeters (inches)
2 .3 8 (.0 9 4 ) 2 .1 9 (.0 8 6 )
6 .7 3 (.2 6 5 ) 6 .3 5 (.2 5 0 ) -A5 .4 6 (.2 1 5 ) 5 .2 1 (.2 0 5 ) 4 1 .2 7 (.0 5 0 ) 0 .8 8 (.0 3 5 )
1 .1 4 (.0 4 5 ) 0 .8 9 (.0 3 5 ) 0 .5 8 (.0 2 3 ) 0 .4 6 (.0 1 8 )
6 .4 5 (.2 4 5 ) 5 .6 8 (.2 2 4 ) 6 .2 2 (.2 4 5 ) 5 .9 7 (.2 3 5 ) 1.0 2 (.0 4 0 ) 1.6 4 (.0 2 5 ) 1 2 3 0 .5 1 (.0 2 0 ) M IN . 1 0 .4 2 (.4 1 0 ) 9 .4 0 (.3 7 0 ) L E A D A S S IG N M E N T S 1 - GATE 2 - D R A IN 3 - S OU R CE 4 - D R A IN -B 1 .5 2 (.0 6 0 ) 1 .1 5 (.0 4 5 ) 3X 2X 1 .1 4 (.0 4 5 ) 0 .7 6 (.0 3 0 ) 2 .2 8 ( .0 9 0 ) 4 .5 7 ( .1 8 0 )
0 .8 9 (.0 3 5 ) 0 .6 4 (.0 2 5 ) 0 .2 5 ( .0 1 0 ) M AMB N O TE S :
0 .5 8 (.0 2 3 ) 0 .4 6 (.0 1 8 )
1 D IM E N S IO N IN G & T O L E R A N C IN G P E R A N S I Y 1 4 .5 M , 1 9 8 2 . 2 C O N T R O L L IN G D IM E N S IO N : IN C H . 3 C O N F O R M S T O J E D E C O U T L IN E T O -2 5 2 A A . 4 D IM E N S IO N S S H O W N A R E B E F O R E S O L D E R D IP , S O L D E R D IP M A X. + 0 .1 6 (.0 0 6 ) .
Part Marking Information
TO-252AA (D-PARK)
EXAM PLE : TH IS IS AN IR FR 120 W ITH ASSEM BLY LO T C OD E 9U 1P
IN TER N ATIO N AL RE CTIFIE R LO G O
A
IR FR 120 9U 1P
FIR ST PO R TIO N OF PAR T N U MBER
ASSEM BLY L O T C OD E
SEC O ND PO R TIO N O F PAR T NU M BER
8
www.irf.com
IRLR/U2905
Package Outline
TO-251AA Outline Dimensions are shown in millimeters (inches)
6 .7 3 (.26 5 ) 6 .3 5 (.25 0 ) -A 5 .4 6 (.2 1 5 ) 5 .2 1 (.2 0 5 ) 4 1 .2 7 ( .0 5 0 ) 0 .8 8 ( .0 3 5 )
2 .3 8 (.0 9 4 ) 2 .1 9 (.0 8 6 ) 0 .5 8 (.0 2 3 ) 0 .4 6 (.0 1 8 ) L E A D A S S IG N M E N T S 1 - GATE 2 - D R A IN 3 - SOURCE 4 - D R A IN
6 .4 5 (.2 4 5 ) 5 .6 8 (.2 2 4 ) 1 .5 2 (.0 6 0 ) 1 .1 5 (.0 4 5 ) 1 -B 2.2 8 (.0 9 0) 1.9 1 (.0 7 5) 9 .6 5 ( .3 8 0 ) 8 .8 9 ( .3 5 0 ) 2 3 6 .2 2 ( .2 4 5 ) 5 .9 7 ( .2 3 5 )
N O TE S : 1 D IM E N S IO N IN G & TO L E R A N C IN G P E R A N S I Y 1 4 .5M , 19 8 2 . 2 C O N T R O L L IN G D IM E N S IO N : IN C H . 3 C O N F O R MS TO J E D E C O U T L IN E TO -2 5 2 A A . 4 D IM E N S IO N S S H O W N A R E B E F O R E S O L D E R D IP , S O L D E R D IP M A X. + 0.1 6 (.0 0 6 ).
3X
1 .1 4 (.0 45 ) 0 .7 6 (.0 30 )
3X
0 .8 9 (.0 35 ) 0 .6 4 (.0 25 ) M AMB
1 .1 4 ( .0 4 5 ) 0 .8 9 ( .0 3 5 ) 0 .5 8 (.0 2 3 ) 0 .4 6 (.0 1 8 )
2 .28 (.0 9 0 ) 2X
0 .2 5 (.0 1 0 )
Part Marking Information
TO-251AA (I-PARK)
EXAM PLE : TH IS IS AN IR FU 12 0 W ITH ASSEM BLY LO T C O D E 9U 1 P
IN TE RN ATION AL R EC TIFIER LO GO
IR FU 12 0 9 U 1P
FIR ST PO RTION O F PAR T N U M BER
AS SEMBL Y LO T C O D E
SEC O N D PO R TIO N O F PAR T N U MB ER
www.irf.com
9
IRLR/U2905
Tape & Reel Information
TO-252AA Dimensions are shown in millimeters (inches)
TR TRR TRL
1 6.3 ( .641 ) 1 5.7 ( .619 )
16 .3 ( .641 ) 15 .7 ( .619 )
12 .1 ( .4 76 ) 11 .9 ( .4 69 )
F E E D D IR E C T IO N
8.1 ( .318 ) 7.9 ( .312 )
F E E D D IR E C T IO N
NO T ES : 1. C O N T R O LL IN G D IM E N S IO N : M ILLIM E T E R . 2. A LL D IM E N S IO N S A R E S H O W N IN M ILL IM E T E R S ( IN C H E S ). 3. O U T L IN E C O N F O R M S T O E IA -4 81 & E IA -54 1.
13 IN C H
16 m m NOTES : 1. O U T LIN E C O N F O R M S T O E IA -481 .
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 12/00
10
www.irf.com


▲Up To Search▲   

 
Price & Availability of IRLRU2905

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X